02 taco needs help.

Throwing 3 codes
(P0100-Mass or Volume Air Flow A Circuit)
(P0101-Mass or Volume Air Flow A circuit Range/Performance)
(P0110-Intake Air Temperature Sensor 1 Circuit)

the problem I’m having is right after my truck starts it stalls after 3 seconds. If I unplug the MAF then it doesn’t stall, I’ve bought a new MAF but it still does the same thing I’ve also put a aftermarket intake on it but idk if that would do anything I’m sure it’s definitely pulling more air in?.

 

Why so many threads? Stick to the threads you already have open so that others can see the whole story.

You need to get a reader on there and look at the data coming out the MAF (SGII or a bluetooth reader with an app on your phone).

What brand MAF did you buy? If it's not OEM or Denso, take it back.

I would highly suspect a vacuum leak somewhere.

 

Yea my bad I was just trying to make it more straightforward not having to have to read all of it but the full story probably helps my bad. But I’ve got a live read on the MAF and it just seems fine I can only get a reading when the key is on the “on” position cause if I try to start it it will stall if the MAF is plugged in. I ran it with the MAF unplugged I think it was just giving a stock reading or something when I was giving it gas it was staying at the same g’s the whole time

 

Mods merge this with OPs “my problems” thread.